gear selector adjustment?

OK , let me give it a try . First , a helper will be benefit you but not necessary . 1. Disconnect linkage from trans at trans lever . 2. manually put trans in "park" at the trans lever . 3. place column shifter in "park" . 4. adjust linkage so the adjustment just slips into the trans lever . 5. remove adjustment arm from trans lever and manually place trans arm in low (1st). 6. move column shift to low (1st). 7. adjustment lever on trans should just slip in . 8. if not , try 1/2 way and recheck by putting both column and trans in park . 9. MAKE SURE that you cannot start car except in (park or neutral) . Not a hard job just time consuming . Ask me how I know . Good luck , Tom