Lunati Cam Noise

I have a lot of oil at the rockers and I have 45 psi at a hot idle in gear with a standard pump. Everytime I removed a valve cover there is oil dripping off the retainers.
As far as Mobil1 having enough ZDDP, does anyone know for sure. I've heard arguments on both sides. I broke the cam in on VR1 10w30 and it didn't change when I switched to the Mobil1 synthetic.
The springs are Hughes 1110 with 120 on the seat and 300 at lift. I emailed there tech and they said they would be fine.
I'm thinking that the 1.6 ratio and the guide plate setup is most of the noise generator.
I also have Lunati's standard lifters that came with the kit so they might be a little noisy too.