Ok I've read that someone named Charlie S that makes one. I would like to buy a bracket that works. Dont want to fab one or hunt in Junk yards for Volare/truck mounts. Its going on a 75' duster with a factory RV2 compressor.
Slant 6 Sanden compressor swap
- Thread starter bignick
- Start date
-
1963dartgt
Well-Known Member
Id love to know where i can get some also. This california heat is gonna get me this year.
BillGrissom
Well-Known Member
Read this post www.forabodiesonly.com/mopar/threads/air-conditioning-options.280822/#post-1971409748
and please contribute anything new you find. I recall that Charlie_S sold all the Sanden brackets he made years ago. I recall some have bought the Nostalgic Air brackets, but didn't post any photos of the install, and the factory sales drawings aren't very clear.
and please contribute anything new you find. I recall that Charlie_S sold all the Sanden brackets he made years ago. I recall some have bought the Nostalgic Air brackets, but didn't post any photos of the install, and the factory sales drawings aren't very clear.
67Dart273
Well-Known Member
Did any FACTORY slants come with Sanden? I know the V8 pickups "somewhere in the 80's" did I had a boss that had one
And the dubya dubya dubya strikes again............
Slant Six Forum, :: View topic - need help with choke and vacuum stuff
82 Dodge pu
And the dubya dubya dubya strikes again............
Slant Six Forum, :: View topic - need help with choke and vacuum stuff
82 Dodge pu
BillGrissom
Well-Known Member
Some Volare/Aspen ~1977-79 came w/ a Sanden. I pulled the brackets off a 1978 Volare at PickNPull, but a bit wide for my early A unless I change to a narrower battery (becoming standard on some new cars). Those brackets also mount a Saginaw power steering pump.
The 82 Dodge truck compressor shown might be Chrysler's C-180 (recall), which I think was a similar swash-plate design as a Sanden, but a different interface. Of course, Sanden's come in various mounts and fittings, and there are Chinese knock-offs. Most kits are for the common 4-ear Sanden in the standard length - SD508 (5 piston) or SDH15 (7 piston).
The 82 Dodge truck compressor shown might be Chrysler's C-180 (recall), which I think was a similar swash-plate design as a Sanden, but a different interface. Of course, Sanden's come in various mounts and fittings, and there are Chinese knock-offs. Most kits are for the common 4-ear Sanden in the standard length - SD508 (5 piston) or SDH15 (7 piston).
2nup350
the four doors are mandatory
I built my own. It's for sale now as I'm throwing the slant away.
-
