440RB INDY DUEL PLANE OR RPM INTAKE HELP

i left this open for a while without realising till i visited again.
Well i did the dyno session last year on the latest super flow and i fell short a bees dick 699.5hp @6500 and 650 lb/ft.
I am about to dyno my new engine now and i was looking to see if anyone built something similar to mine.
Now that I've gone to a 496 4.150 stroke i kinda regret that i didn't go hyd roller.
i had the 236/242 solid roller on 112lsa and crower lifters .
i have the trick flow heads and had the ports just smoothed of the cnc marks.
I am using the sniper efi and gone the M1.
Im having the intake professionally ported and welded up to match the trick flow ports perfectly.
guy comes out on site and measures it all up assembled on short before and after welding as he has to skim intake.
Im not sure what to expect with the rpm .
Will this engine see 5700rpm?
I think it may roll over somewhere between 5500 and 5700.
I switched out the valve springs as they were to hard.
I have set the springs installed 185lb and with my 1.6 rocker it has around .605" and 465lb open.
Just waiting for the heads and intake to come back in the next week or 2.