Who are my 400 stroker guys?

I have a .035 over 400 using the 440 Source 500 ci kit.
The block wasn't decked, and the pistons sit in the hole about .030"
I'm using the -4 flat top pistons and topped with closed chamber fully assembled Eddy RPM heads.
The cam is a solid Lunati that is the most aggressive Voodoo. For my mostly street car is too much, but it's what I had.
That's all topped with a single plane holley dominator intake and holley 850 DP.
I run the stock 833 manual trans and 8-3/4 with 3:55 gears.
I never had the combo dyno-ed, but it has taken my chunky E-body to a best off 12.9 at 115 MPH skating the whole way down the 1/4 mile.
It is a premium pump gas motor that cruises the street, runs power brakes and no overheating issues.
I have just under 7000 miles on it, and has had no issues.
Great oil pressure, good even compression numbers and no issues.
With the aggressive cam it pulls lile a freight train when that cam hits it's power band.