3.58, 3.79, or 4.0 stroke in a 360

If you needed to buy a forged crank, good rods, and forged pistons, which would you choose? Plan is to aim for around 350-400 fwhp NA and add a turbo to get to 600 fwhp with 7-10 psi and pump gas. I figure the stock stroke would work best with the pistons and getting a 9:1 CR. Thought about stepping up to Molnar crank and rods, but 3.79 is his smallest stroke. Goal with car is drivability with 2.76 or 2.94 gears, go to the track a few times a year not chasing, and cruising on weekends.