Switching to Manual Steering

another lil somethin... The column bracket has 2 studs behind that little plastic door. One stud should have a short ground jumper wire and a second nut on it. The 3rd is farther down on right side and is most likely a bolt going into a caged or captured nut. DO NOT cross thread that bolt when going back together. I did that once with my air ratchet. Cost me a hour too. Had to cut the bolt out with a die grinder, find replacement hardware, get a end wrench on a hex nut up under there. Just a bad day.
I wont ever take the air ratchet under the dash again.
Phillips head screw driver, 3/8 hand ratchet, 7/16" deep socket on a 6" extension, 1/2" socket on a 12" extension plus that 6 inch extension to reach the firewall, Should be all you need inside. Good luck with it.