I bought the complete kit from Scarebird. Check their website. It includes loaded calipers that have a nub ground down to fit. Hoses and clips, rotors drilled for the 5x4 pattern. That is what held me back in the past because they would supply you with a paper template to drill the holes. The complete kit is under $500. You use your hubs minus the drums. Strip off all the parts down to bare spindles, install the brackets, calipers hoses, etc. No breaking down the front end. I am very happy with the system. Very easy to install. I am running 14 x 5.5 steelies. I don't think the factory rallye wheels fit. I had a set of repop 14x6 rallyes on it that worked fine. It's a mix of parts, but all easy to get pads, etc at Napa,and others. Scarebird also sells just the rotors predrilled separately if needed. It doesn't widen the front track either. The thickness of the rotor hat is a little thicker than the brake drum it replaces. Scarebird suggests you install longer studs which I did, but I don't think it was necessary. I don't have a parts list in front of me, but they give you the list for reference. Toyota rotors, Chevy celebrity calipers and pads, Caddy brake lines If you Goggle Scarebird, someone posted their install step by step with pictures. Bruce
