MSD 8388 Small Block R-T-R Distributor!
Hey folks! Have a good deal on a darn expensive dizzy. Powers my 378ci Small Block extremely well! I can't use this with my blower setup (FITech can only control their simpler 2-wire distributor for timing retard under boost) so I'm selling this to get the basic MSD dizzy, and now someone else's ride will be blasting off! Well over $100 off MSRP, includes original box and necessary wires. Video available on request!
Seriously, 3 wires (no box!) and 5 minutes and this thing was firing my engine better than any other system I have used; that's why I'm sticking with MSD.
I'm looking for $325 plus $20 to ship (from Rodeo, Ca.) to anywhere in the continental US. It's listed on my Ebay for more, but you guys are great so here it is!
CHRYSLER 318-360, READY-TO-RUN DISTRIBUTOR
Fits 273, 318, 340 and 360 small block Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter
PART# 8388
$463.95 Suggested Retail
MSD’s Ready-to-Run Pro-Billet Distributors for Chrysler engines are the perfect upgrade from breaker points or weak electronic ignitions. These distributors feature a maintenance-free magnetic pick-up that accurately triggers the built-in powerful ignition module. This module produces a high-output spark which improves combustion in the cylinder, resulting in quick starts, a smooth idle and great performance. Just beneath the race rotor is a mechanical advance assembly so a timing curve can easily be tailored to match your application. The QPQcoated shaft is guided by a sealed ball bearing assembly for stability and endurance while a vacuum advance canister helps increase economy on those long cruises. The Ready-to-Run Distributors are also a breeze to install. Simply drop it in the engine and connect three wires and you’re ready-to-run to your favorite cruise! The front engine mount models are designed in a special small diameter housing to clear aftermarket heads and valve covers.
Features:
The following vehicles are considered Emissions Controlled Vehicles:
Hey folks! Have a good deal on a darn expensive dizzy. Powers my 378ci Small Block extremely well! I can't use this with my blower setup (FITech can only control their simpler 2-wire distributor for timing retard under boost) so I'm selling this to get the basic MSD dizzy, and now someone else's ride will be blasting off! Well over $100 off MSRP, includes original box and necessary wires. Video available on request!
Seriously, 3 wires (no box!) and 5 minutes and this thing was firing my engine better than any other system I have used; that's why I'm sticking with MSD.
I'm looking for $325 plus $20 to ship (from Rodeo, Ca.) to anywhere in the continental US. It's listed on my Ebay for more, but you guys are great so here it is!
Here's what MSD says about the 8388:
CHRYSLER 318-360, READY-TO-RUN DISTRIBUTOR
Fits 273, 318, 340 and 360 small block Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter
PART# 8388
$463.95 Suggested Retail
MSD’s Ready-to-Run Pro-Billet Distributors for Chrysler engines are the perfect upgrade from breaker points or weak electronic ignitions. These distributors feature a maintenance-free magnetic pick-up that accurately triggers the built-in powerful ignition module. This module produces a high-output spark which improves combustion in the cylinder, resulting in quick starts, a smooth idle and great performance. Just beneath the race rotor is a mechanical advance assembly so a timing curve can easily be tailored to match your application. The QPQcoated shaft is guided by a sealed ball bearing assembly for stability and endurance while a vacuum advance canister helps increase economy on those long cruises. The Ready-to-Run Distributors are also a breeze to install. Simply drop it in the engine and connect three wires and you’re ready-to-run to your favorite cruise! The front engine mount models are designed in a special small diameter housing to clear aftermarket heads and valve covers.
Features:
- Simple and clean installation with only three wires to connect
- Mechanical advance assembly can be locked out for crank trigger systems
- Supplied with a HEI style distributor cap and rotor (accepts Cap-A-Dapts)
- CARB E.O. Approved
- Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
- Polished steel shaft is QPQ coated and guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mechanical advance with supplied springs and stop bushings
- Powerful built-in module produces a 7.5 amp single spark through high rpm
- Now includes built-in Rev Limiter
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
