cranks but no spark at coil

cranks but no spark at coil

Thanks KC. Amazing how expensive heat shrink connectors are!
There is actually a total of 6 red wires. 2 bottom ones (need replacing) and 4 in the top. Im thinking of one of these. Got this pic from Mad Electrical website.
Looks sturdy and simple. Any experience with these?
Thanks for chiming in.

KitCarlson said
Something like a #8 gauge insulated butt connector should work. It is not easy to guess gauge in photo. Heat Shrink Butt Connector Red 8 Gauge - Bt-8hs - Heat Shrink Butt Connectors - Butt Connectors
If you need #6 Ace 6 AWG Insulated Butt Connector - Wire Clips & Connectors - Ace Hardware
You will also need decent large crimp tool.
I would cut back the crap soldered ends, clean copper with clean 3m green pad, crimp lower 2 in one end, the upper 3 in other. Slip additional heat sink first, use it as secondary insulation and seal.