Borgeson steering box quick question
I had the same question when I installed mine. They should put that in the instruction manual. Wait...they should have an instruction manual. lol
Exactly...
there was definitely nothing easy with this installation either
1. My Dougs headers sucked had to heat #1 tube several times and prybar it clear of the steering box.
2. Had to remove the motor mount, battery box I figured and expected that anyhow.
3. One of the Borgeson box housing holes I had to slightly make bigger so the box would line up with the factory holes.
4. Had to tap and die that factory hole and bolt after the box didn't quite line up on the first, second and third attempt...till I figured out why the bolt wasn't threading.
5. The steering coupler was no easy task to get it on the box as it fit extremely super tight.
6. Some starting point with the steering wheel/ratio turns etc. heres where some instructions or manual would have helped.
7. Now I got to play with the steering wheel hopefully I can get it set straight cause the coupler is definitely not going to come off easy without swearing and bloody knuckles.
On the plus feels real tight on the steering very responsive and no slop like a plain Jane 1972 steering box is, now everything is fresh and newish on the front end.
