Bloomer Performance

There's a problem with your cylinder head list. It is somewhat out of date.

Edelbrock Performer can be ported out to suite the need. But I don't know about "700hp" levels. I haven't heard of anyone getting there. Probably the most inexpensive to build and run.

Brodix B1BA shows max ported values so porting prices on top of an already expensive head. Not a route I'd take with those heads. Not enough cfm I think

BPE is not doing the heads .... yet????

MoPar Super Comando heads are no longer produced. You may yet find them on e-bay IF the seller knows that they ARE indeed the head advertised and not the regular Comando.
Not enough cfm for think.

Air Wolf head is no longer available.... & for a long time now.


W5. Some sets still float around. The values are shown are MAX values that are achieved by only the best porters.
And that is only attainable IF the W5 head is a good casting. Even the so called better casting suffer from poor casting techniques and can not be ported that far.
There also a inferior aluminum that does not lend
Itself to be welded. Epoxy it s your only answer. NOT that it is a bad answer, just the only one.

Both Indy heads are also showing max ported efforts. Purchase them from a head porter here all ready done. You'll save in the long run. Dealing with Indy has only resulted in a lot of pissed off people screaming about how bad Indy customer service is truly the worst in the world.

Also! Be reminded of the added or different rocker arm expense between a stock replacement type head (AKA Edelbrock and the further removed from stock heads.)

Added thoughts and spelling.