We used a telescopic/snap gauge to check the lifter bores. All with in spec. The pan is a stock pan the pick up is stock with the recessed screen aprox. 1/4" the pick up is aprox. 1/4-3/8 " off the bottom of the pan. We ran it,, then. let it sit for aprox. 5 min. thinking the pan may be getting sucked dry. Then upon restart it would only make 25/30 lb. @ 2000 rpm with No. 7 lifters still clicking away. This is the 2nd. new hv oil pump we've tried. Two bad ones ?? possible. Even if the plug behind 1-7 was missing/leaking would it be able to make 60 lb. at cold start up ?