Printed Circuit Board Pin
So my soldering skills aren't the best. I don't do it hardly ever, but I was able to get the pin attached. I decided not to try using a small nail etc and just solder the pin back to the board. I had trouble getting solder to stick to the pin even though I cleaned pretty well with very fine steel wool. But finally got it done. I'm hoping this works, by reading the wiring diagram I think it should. These dash bulbs are the only thing that doesn't work aside from the rear courtesy lights.
So my soldering skills aren't the best. I don't do it hardly ever, but I was able to get the pin attached. I decided not to try using a small nail etc and just solder the pin back to the board. I had trouble getting solder to stick to the pin even though I cleaned pretty well with very fine steel wool. But finally got it done. I'm hoping this works, by reading the wiring diagram I think it should. These dash bulbs are the only thing that doesn't work aside from the rear courtesy lights.
