67 Fastback getting 8.8 rear
Made a little progress. A friend helped stick weld with -5* down on the pinion angle. Its probably wrong but I had to pick a number and go with it. I may have to shim it later. I didn't do the preferred method of getting it under the car and adjusting the pinion angle like I wanted to. The welding was a free limited resource, so I had to take advantage of the situation and get it done. Plan is to weld the axle tube to the housing as well. Possibly have it all done tomorrow. So far so good spring perches set at 42"O.C. for my DocDiff offset shackles.
Made a little progress. A friend helped stick weld with -5* down on the pinion angle. Its probably wrong but I had to pick a number and go with it. I may have to shim it later. I didn't do the preferred method of getting it under the car and adjusting the pinion angle like I wanted to. The welding was a free limited resource, so I had to take advantage of the situation and get it done. Plan is to weld the axle tube to the housing as well. Possibly have it all done tomorrow. So far so good spring perches set at 42"O.C. for my DocDiff offset shackles.
