1973 Dart 340 Sport Project
Got the short block assembled today. Can't say enough about the great machine work George at CAMS Racing Engines did. All 5 main bearing clearances were exactly the same. Rod bearings were within 0.0005. Rod side clearances were within 0.0010.
George also reworked the Edelbrock heads. Had to open up the valve guides, replace the cheap seals that came with the heads, lapped and back cut the valves, set the spring heights for the Voodoo cam, and cc'd them. Advertised at 63cc, measured out to 64.5cc.
Gonna be a sweet engine when completed.
Got the short block assembled today. Can't say enough about the great machine work George at CAMS Racing Engines did. All 5 main bearing clearances were exactly the same. Rod bearings were within 0.0005. Rod side clearances were within 0.0010.
George also reworked the Edelbrock heads. Had to open up the valve guides, replace the cheap seals that came with the heads, lapped and back cut the valves, set the spring heights for the Voodoo cam, and cc'd them. Advertised at 63cc, measured out to 64.5cc.
Gonna be a sweet engine when completed.
