Im running a 1976 360 block that is half filled with block filler and block is bored .040 over. Wisco pro tru pistons and pins, eagle h beam rods and eagle 4 in stroker crank. I run Hughes engines stage 3 edelbrocks that was hand ported in 2006 (299 cfm @ .600) and a Hughes solid flat tappet cam AS 276/280 @ .050. I run Manley Beehive springs and Comp cams Pro magnum rockers. Intake is a M-1 with a holley hp950 carb that I converted to E-85 a few months ago. Tranny is a 904 with a 2.77 first gear, a tranny brake and converter is an 8 in Continental that was reworked by Lenny at Ultimate converters that flash stalls to 5700. Im running a Dana 60 with 4.56 gears. I built this motor in Dec of 2006 and we have 1000s of passes on it. Best pass is 10.03 @ 131 and that was in July in 86 degree weather with the new E-85 carb I built.
