1969 Dart GTS RestoMod named Dottie Rae in NC

Cleaning up the tub pieces for a while today. I don't know if that carp is factory but it sucks to get off. I pulled out the RB block I will use and a set of truck heads for mock-up. I need to get the engine compartment in place so I can decide how things will be routed. Will mount a block/heads and a transmission for mock up.

I know, no pictures, I will remedy that. It's such a pain in the as s to take a picture with my phone, email it to my tablet after I reduce it's size and then load it from my tablet.

I will need to plan routing for:

Battery wire needs to go to trunk.
1/2 or 3/8 inch metal fuel line to the tank underneath
Fuel Injection wiring to inside of firewall.
Ignition wiring to MSD6AL box.
Wiring from 6AL to inside firewall.
Electric fan wiring to inside firewall.
Oil pressure gauge tubing to dash.
Water temperature signal wire to dash
Voltmeter wiring to dash.
A/C line to dryer and then to dash unit.
Turn Signal and Headlight wiring.
Horn wire and mount location.
Line lock wire to dash.


Help me, what have I forgot guys?

I DO NOT want to have to drill (or fill) any holes after paint.

I guess I better get headers too so wiring and brake lines etc. will be clear.

Ouch, my wallet hurts!