Custom Cometic head gasket pics
Dual outlet electric water pump to the center frost plugs of the block
The picture of my motor with a vacuum pump in front instead of a water pump. Water will not be fed into the front of the motor.
When the coolant comes into the side of the block I want it to go up into the heads through the bottom 4 coolant holes that pass right over the exhaust valve. A stock head gasket has the two center cooling holes very restricted which is countering what I am trying to do. See pic of stock gasket.
This mod is from a thread on Mopar chat by Sanborn and from the striker small block book. Sanborn used to punch the coolant holes larger, but that is much more difficult to do on an Mls gasket, so I had Cometic make the gaskets with the holes enlarged and relocated.
I will be feeding the coolant output from a radiator mounted meziere
Dual outlet electric water pump to the center frost plugs of the block
The picture of my motor with a vacuum pump in front instead of a water pump. Water will not be fed into the front of the motor.
When the coolant comes into the side of the block I want it to go up into the heads through the bottom 4 coolant holes that pass right over the exhaust valve. A stock head gasket has the two center cooling holes very restricted which is countering what I am trying to do. See pic of stock gasket.
This mod is from a thread on Mopar chat by Sanborn and from the striker small block book. Sanborn used to punch the coolant holes larger, but that is much more difficult to do on an Mls gasket, so I had Cometic make the gaskets with the holes enlarged and relocated.
