Another clutch not completely disengaging thread

Here's what I have learned about bleeding clutches or anything, air goes up so trying to force the air down a hose from the master cyl never works, the air always comes back up the hose.
Here's what I do, first drain the fluid, then put your bleeder hose on the bottom of the slave and the master hose on top. Now make a quart squeeze bottle of brake fluid and a hose and hook it to the bleeder screw. Now open the bleeder and force the fluid from the bottom to the master cyl. This will take all the air with it to the top and out the master cyl reservoir. Tighten the bleeder and you should be good to go.