1975 360/904 combo
Pistons not replaced. Machine shop cleaned them up before balancing the assembly. Everything is new on the heads but I did not have them cc them after resurfacing them. Block was resurfaced but the slugs were still a touch down in the hole on assembly. Used a stock Felpro gasket on the heads. Bottom line is I pushed the compression above stock. I thought I had a good picture of the pistons on assembly but I can’t find it right now. Can crate and ship anywhere at cost. Can pick up as well. PM for more and a phone if you want to talk.
Pistons not replaced. Machine shop cleaned them up before balancing the assembly. Everything is new on the heads but I did not have them cc them after resurfacing them. Block was resurfaced but the slugs were still a touch down in the hole on assembly. Used a stock Felpro gasket on the heads. Bottom line is I pushed the compression above stock. I thought I had a good picture of the pistons on assembly but I can’t find it right now. Can crate and ship anywhere at cost. Can pick up as well. PM for more and a phone if you want to talk.