Choosing the right Caltrac mono leaf spring

-

Mrpatel

512Dart
Joined
Nov 8, 2007
Messages
488
Reaction score
105
Location
Niagara, Ontario
Looking for suggestions on the corrrect mono leaf spring for my car and what determines the height?
Car details
1968 Dart GTS BB
700 HP
727 / foot brake
325 50 15 rear tire
8 3/4 rear.
Not sure the exact weight of the car.
Thanks for looking Andrew
 
Last edited:
First and second order of business..........weigh the car, the folks at Calvert will want to know that number, while you are at it get the front to rear split. With the car sitting on its tires an a level surface, pick a reference point on the car at all four corners OR, call Calvert and ask what they use as a reference point, get your tape measure out and measure; write it down.

As I recollect, Calvert gives you the options of +1, -1, 0 for ride height (they may give more options, talk to them, they are there to help).

When I bought mine years ago I went with 0.

DSCF0286.JPG
 
I see they have the 0, +1,-1 etc. is that equal to 1” inch of ride height? If the weight is super crucial, than I will have wait until next summer until I get the front end and engine put back in. I was thinking that a ballpark weight would have been fine. Thanks Andrew
 
Looking for suggestions on the corrrect mono leaf spring for my car and what determines the height?
Car details
1968 Dart GTS BB
700 HP
727 / foot broke
325 50 15 rear tire
8 3/4 rear.
Not sure the exact weight of the car.
Thanks for looking Andrew

Contact John Calvert
 
Looking at your picture and draginmopars I would guess you want 0.
 
-
Back
Top