Small Hughes cam in 318

I have a Hughes HEH 215/223 cam in a budget 318 shortblock and for the fun of it I checked their cam specs against my measurements. Cam is 112* LSA, (ICL 109*, mine went in at 107*).
I ended up very close to the specs they list, (215* @.050 Int./ .462" lift/ 36* ICA @.050"- I got 35*) but I was curious about the ADV. Dur. and Intake Closing Angle, which Hughes doesn't list. I measured these at .006" (seems to be the most common?).

I got an ADV. Dur. @.006 of 269* and an ICA of 61*

These were more than I expected.
Does this sound like a lot for a 215* @ .050 cam?
I sure could've made a mistake, but since I was close with the listed specs, I dunno.
Thanks.