Wiper switch retainer removal tool

-
I just put electrical tape on the tips, just be carefull you will be fine.
 
Works great on the antenna nuts also. If you have the 90 degree ones even better.
tekton-snap-ring-pliers-3571-64_1000.jpg
 
Ha, I'll go one better..most of the time you don't need any tool at all.
Grab the switch from behind and twist it back and forth while you apply a bit of finger muscle on the bezel nut.
I can almost always get them off that way, and sometimes even tighten them down too
 
Went through that nut roll scratching fresh paint. I bought some, they come in real handy. also got one for the antenna bezel. I'll have to check but I think US Tool has them.
 
-
Back
Top