360 Advice Needed - Autocross / Street Engine Build

autoxcuda said
Are you runnning a biscuit 68-72 Kmember or a 73-76 K?

If your running a 73-76 style it would be a good idea to trim it for clearance now as opposed to see if it rubs after you install. Mine is very close I didn't have to cut. IIRC 72nublu post pics of where to cut.

For the road race pan and the main studs you'll have to cut the excess threads off the center. And maybe/probably easy dimple for piece of mind. I've got pics of this in previous threads.

I had to notch the driver's side engine mount on the K frame with my 73-76 style spool mount K-frame. I used stock mounts but with poly bushings, so, that may have played a part. Another option for you would be a Kevko oil pan, The M302 has an extra quart of capacity and a few baffles/traps M301 - 340M302 - 360Stock Location.

Here's the pictures of what I did to fit the Milodon road race pan.