Got carried away with the RustOleum
Promised myself to use two coats of rusty metal red primer on the inside surfaces of the cylinder block, but lost all sense and kept spraying. I know it's too much, but only time will tell how it sticks. At least it will have a month to dry (and yesterday it was about 80 degrees outside during the spray). Read some stories about paint plugging up the oil pump pickups but never had the paint slough (sluff) off on my other motors.
Being this is an "interim" motor, I am not going to color coat the outside either, it will remain in its "raw" primer coat.
Promised myself to use two coats of rusty metal red primer on the inside surfaces of the cylinder block, but lost all sense and kept spraying. I know it's too much, but only time will tell how it sticks. At least it will have a month to dry (and yesterday it was about 80 degrees outside during the spray). Read some stories about paint plugging up the oil pump pickups but never had the paint slough (sluff) off on my other motors.
Being this is an "interim" motor, I am not going to color coat the outside either, it will remain in its "raw" primer coat.
