Add 273's, 340's & 360's to the "318 Race" ?
You know 318willwin is not the official race master of for a bodies only? (No disrespect intended of course) You can make up your own graph and thread and see if people want to race your Race too? I have a 360 Stroker and I would participate in your race, I can't participate with it in 318willwins.
I dont have the experience to do my own. This will be my 1st year down the track.
Dont even know if my graph holds up, its base on the fact 318willrun thinks about 42 cubes equals .6 ( 360 = -.6 and 273 = +.6 compared to 318).
So I asked the /6 ers a 225 super six baseline to see if it least hold true on the lower end. I got a et of plus 18 for response.
So my graph on cid alone says the 225 will be 1.4 slower so that get us to 17.30.
Now we got to look at the rest of the /6. First the stock head would give lesser performance compared to the stock 318 head everything is based on. I feel since a fully ported /6 head is probably on par with a stock 318 head. I would give a ported /6 head a zero on the point system and probably give a stock /6 head a plus .6.
So that gets us a 17.90 is that close enough or does it need find tuning. Need a /6 expert fine tune the equation. Plus on the super six 2bbl id say its even with the 318 2bbl so zero for that and add plus .1 or .2 for 1bbl ??
For the rest you could probably just use 318willrun penalty box as is .
For stroker its easier forget the minus for 340 and 360 and magnum and in my graph say minus 1.3 for a 408 plus for the the rest use 318willrun penalty box. What does it add to ?? Does it sound right ?? Again need someone with stroker and lots of track time to fine tune it.
My car fits 318willrun requirements so im good lol.
