Red Headed Stepchild-75 Swinger LSX Swap
Made more progress so far this week. Blocked the old hole that was tapped and relocated the -10 fitting to the front, it'll be tight but a 90 fitting should clear the crank pulley just fine.
Got the windage tray and oil pickup tube mounted. It's a camaro pickup which I bent just a little to allow for the correct depth for the pan.
Then mounted the new oil pan gasket and oil pan. You can see thete is plenty of room all around, and give me plenty of room for the -8 fittings coming off the pan to the remote oil filter.
Made more progress so far this week. Blocked the old hole that was tapped and relocated the -10 fitting to the front, it'll be tight but a 90 fitting should clear the crank pulley just fine.
Got the windage tray and oil pickup tube mounted. It's a camaro pickup which I bent just a little to allow for the correct depth for the pan.
Then mounted the new oil pan gasket and oil pan. You can see thete is plenty of room all around, and give me plenty of room for the -8 fittings coming off the pan to the remote oil filter.
