A-Body 8 3/4 Axles Shaft

If you cut a set of axles and have them resplined make sure you have the splined ends re hardened. I just pulled a set out of a duster and they were twisted. I guess if you have skinny tires and no power you can get away with it.
You are better off re drilling axles and drums from your car. My son does them $125.00 all four 2 axles and 2 drums. Used them with slicks no problem. you pay the shipping both ways and the studs/bolts . Bolt heads must be cut to clear the parking brake arm. new studs/bolts are threaded in instead of presssed they are also tig welded to axle so not to walk in when tightening lugs. stud /bolt length must be determined for depth of lug you are using if not using thread though race or factory lugs.