Fixed my M1 / Strip Dominator

rumblefish360 said

@Locomotion

Negative, the M1 with the popsicle sticks for damms. Not the Holley.
Popsicle sticks on the Offy as well. I can’t visualize witch Offy, because they offered square and Spreadbore versions.

I also don’t remember reading that it was needed for one carb and not the other. Just saying.... perhaps what ever carb was used? I don’t know but assumed a Holley was the carb since that would be the carb to race with unless rules dictated otherwise.

Other than that, how is the TQ experiment working?

Click to expand...

I would have put stakes , drilled into the carb base sideways to keep the a-b epoxy from coming loose. It is good stuff if u make something for it to adhere to. I have used it in sbc race type heads where we burned thru the runner walls porting. Also just used a little in the runner roofs of a wieand intake I`ve been playing with, the "supposedly standard" ports were bigger than my cnc standard ports. I did make provisions for it to hold on to the roofs . I would like to have an M 1 for a r/b to do what u did too ! I like them also. Let us know how it all turns out !