Magnum Cam recommendation

TrailBeast said
That I do, and that you did thank you.
It ran me about 150 shipped for a regrind from Oregon Cam Grinders and is 214/224 @.050 on a 110 LSA and .512 lift hydraulic Magnum roller regrind. (No mechanical pump provision)
Projections were about 420 torque at 3,800 RPM's with a range of 1,500 to 5,500.
It is smooth as silk at anything above idle, but has a light rumpety rump at idle if the A/F ratio is in the high 14's-15's.

For me, that cam duration @.050 is IMO the first step above stock everyday useage cam that delivers (when properly complimented) an excellent response that can be used everyday with anyone. From new driver to a cranky 101 YO grandma.

YY1 said
The Lunati roller cams come both ways "Magnum snout" and "LA snout".

I had such a crappy experience and crappy customer relations with them I doubt I’ll go back ever. Only Paxton was worse.