lunati 10200703

Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,800-6,200
Intake Duration at 050 inch Lift: 226
Exhaust Duration at 050 inch Lift: 234
Duration at 050 inch Lift: 226 int./234 exh.
Advertised Intake Duration: 268
Advertised Exhaust Duration: 276
Advertised Duration: 268 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.494 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.513 in.
Valve Lift with Factory Rocker Arm Ratio: 0.494 int./0.513 exh.
Lobe Separation (degrees): 110
Computer-Controlled Compatible: No
Valve Springs Required: Yes

This is a nice sized street cam, for a 360.. Spring it right, you can rev the nuts off it.
In the right combo, this is about my favorite size. It can make gobs of torque, yet likes to rev, and with the right tune, can make really good fuel mileage.
With 1.6 arms and lotsa pressure it doesn't take much stall, and will pull any gear from 2.94 up.
It's a winner in my book.