I need a new k frame. 74 dart

-

D4dartswinger

Member
Joined
Jan 8, 2018
Messages
19
Reaction score
0
Location
California
so I was recently in an accident and messed my dart up :/. I need to replace the upper and lowers on both sides and just found that I also need a new k frame. I recently purchased the tubular upper and lowers from qa1 but their k frame says it’s only compatible with 67-72 Dodge darts. Anyone have any recommendations on where I can find one?
 
so I was recently in an accident and messed my dart up :/. I need to replace the upper and lowers on both sides and just found that I also need a new k frame. I recently purchased the tubular upper and lowers from qa1 but their k frame says it’s only compatible with 67-72 Dodge darts. Anyone have any recommendations on where I can find one?

Out here in AZ I have seen a couple on the Phoenix craigslist, so maybe in your area as well.
I searched "Mopar" when I saw them.

Here's an example.
Mopar Parts 2
 
Out here in AZ I have seen a couple on the Phoenix craigslist, so maybe in your area as well.
I searched "Mopar" when I saw them.

Here's an example.
Mopar Parts 2
Thanks for the reply. Ya I’ve tried. Everything’s gone around here. I spent my day up in Fontana going to all the wrecking yards and not a single one. Smh
 
Post a wanted ad in the classifieds here. You'll be neck deep in em soon enough.
 
Contact the folks at CTC Auto Ranch in Denton, Texas. I once bought a complete '72 & up K from them that enabled me to rob a bunch-o-parts for a disk brake upgrade on my '68 Dart. They are NOT cheap! But, if you're in a pinch you might not have a lot of choices.
www.ctcautoranch.com
Their web site doesn't come close to cataloging all they have in those acres and acres of cars. You will need to call them and tell them what you're looking for. They are usually very helpful over the phone. They can ship economically via motor freight.
 
I have a whole car for el-cheap! $800 and shes yours. V8 and everything. check out my for sale ads in the classifieds.
 
I think i still have a k member from a V8 parts car. It was an original 318 1971 dart but the k member appeared to have the V8 AND the slant 6 mounting pads. I decided to to just use the V8 conversion brackets.
 
-
Back
Top