6 Barrel Pro's - I need your input

I just did this same thing on a 1969 Charger with a 440 and I can tell you it's not cheap. Your kickdown linkage will not be the same. I bought some off ebay and made it work. You can get repop stuff but you have to buy the entire kit, no one will sell just a rod. The rod that goes from the upper bell crank to the lower bell crank is longer. The rod that goes from the center carb is different too. I had to replace my throttle cable too. Return spring bracket is different. Good luck with the idle solenoid. I made a bracket and used one from a Demon carb. The aftermarkets are 100 dollars and are junk. It can be done but not on the cheap.