Indy Cylinder Head Show

-

RPM440+6

FABO Vendor
FABO Vendor
Joined
Dec 1, 2013
Messages
302
Reaction score
212
Location
Georgia
The Indy Cylinder Head Show is coming up on March 3rd and 4th. This will be the 23rd annual show and brings in a large group of vendors from that area and we make the drive from Georgia. The show is held at the Indiana State Fairgrounds.
For those attending the show, we are located in the second building or hall. As you enter into the second building from the first building, look right and we have eight spaces on the far right wall. We will be bringing an assortment of parts, specializing in weatherstripping and fasteners. If anyone should have any special request for reproduction restoration pieces let us know as we are limited on what we have the space for.
Even if you should not need anything, stop by and introduce yourself. I know last year, we had several guys stop in and do that for us. Looking forward to another great show at this venue.
Thanks,
Richard
Restoration Parts and Materials
 
some friends and I will also have two spaces there but I don't know the location at the moment other than it's in the second building. will usually have quite a variation of parts and pieces for all your Mopar needs quality used parts.
 
Bringing stock heads and blocks. B body 8 3/4 one with axles and open center section the other just the housing. 8 3/4 & dana gear sets. car hoods and a 67 power wagon hood also.
One hood is a 69 cuda with funtional twin corner scoops. Another is a 71 dart or demon twin scoop hood without the scoops. It has the factory holes for air flow.
not pricing anything till at the met.
 
Last edited:
Isn't anybody going to this event?
It's only two weekends away guys. I always have fun out of it. And pick up some parts.
 
What' in the 8 1/4 how much you asking just need somehing better than the 7 1/4 go n in stock 318 dart

I not sure if it is 3.23 or 3.55. the pickup one is 3.23 with trac loc and the dart one is 3.55 open i think. no brakes. will bring them both for you to check out. not posting prices till setup at indy. but i am very reasonable because i won't be there for a parts show. trading or cash only.
 
I'm also looking for an A body 8.25 or 8.75 sure grip rear end . I also have a set of J heads I can bring if anyone needs them . Looks like me and Flyinbrian will be racing each other there .
 
Time is getting close. I'm still fighting with the truck rear end. Have decided that it's the carrier. Going to pull cover in the morning and check it out.
Did get the brake leak at the rear caliper stopped finally.
Still planning to be there Friday afternoon.
Hope to see everybody there.
 
I'll be there looking for '69 Coronet front fenders and '67 Satellite trim on Saturday.
 
-
Back
Top