440 on e85

-

73440abody

Well-Known Member
Joined
Sep 27, 2015
Messages
48
Reaction score
16
Location
Dexter
Hey guys, figured I'd share the conclusion of the story I never finished. Couldn't find my original post so I figured I'd make a new one. Here are the specs and what it did on the dyno.
440 30 over
11.5/1 final compression
Hydraulic roller
Trick Flow 240
Pro systems carb
Rpm performer intake
Msd ignition
Made 580hp @5900
590 ft/lbs @ 4400

27738.jpeg
 
That is awesome. What cam and lifters did you use?
Thanks, I was pleased with the results. We used a comp cam and Howard's lifters. It's been a while, but the cam specs off the top of my head is @50 230int 236exh. And final lift after 1.6 rockers was .567
 
Thanks, it's going in a 73' duster. Still need to build trans and do complete gt suspension front and rear. Other than that the car is currently completely assembled with stock suspension under it now.

FB_IMG_1519411171339.jpg
 
-
Back
Top