What's that on the sides where the sail panels are? Imagination? Who left it your job to run around the site correcting me all the time? Lay off me. I'm not in the mood anymore. There ARE spots on the roof TWO layers thick.....was my point.
The metal on the sail panels, the c-pillar structure, has a gap of about 1” or more to the roof structure. It’s only in contact with the roof skin at the very edge where the skin is spot welded, like I said before. The majority part you see in that picture isn’t attached at all.
Thr roof skin rusts because of the moisture trapped by the vinyl top against the roof skin. The inner structure isn’t sandwiched against the roof skin, so, it doesn’t rust like the outer skin. It’s not like a double thick layer where moisture can be trapped, there’s an air gap. The OP’s car could be worse than mine, but it doesn’t appear to be. The inner structure on my car is completely solid with the same kind of rust to the outer skin.
As far as following you around and correcting you, give me a break. I couldn’t care less about you personally, it’s not some vendetta. Stop putting bad information out there and you won’t get corrected, simple as that. I posted here because I’ve personally removed a roof skin to do the same repair, and it’s not as hard as most people seem to think, not just to argue with you. And what you described in your post simply isn’t true.
