69 Dart Swinger with large pattern spindles. Is there a place where I can look up casting numbers?73 up single piston. Hard to tell what model etc... What are they mounted on?
Would your calipers bolt right up to large pattern spindles?They look exactly the same as what is on my 76 Aspen
The last year A-bodies had 2.75" pistons for '76, they are identical to the F-body & other slider calipers, probably because they gained so much freakin' weight by then. I
took a set off of this hulk I stripped for a few parts before donating it to My local Mopar Yard Guy..........
View attachment 1715146349
It has been listed this way for decades in the NAPA/Raybestos parts catalogs, back to the oldest I have from the late '80's. I didn't know that's what I had here because IDo you have some kind of factory documentation on that change?
I wouldn’t be surprised if it was true, ‘76 was the year that everything went disk up front so it’s totally possible the factory went with the same piston across the board too.
But finding a set of 2.75” piston calipers on one car 40+ years after it was built doesn’t mean it left the factory with them, and it certainly doesn’t prove that any other car did. The 2.75” piston bore calipers look just like the 2.6” calipers and they both use the same caliper brackets. The calipers are completely interchangeable, same with the brackets.