Adjustable roller rockers speedmaster vs prw

I think Mike @ B3RE uses the PRW with his geometry correction kit. I've use one set of PRW and had to do so much work to them to prepare them I won't use them anymore. I had to send 3 or 4 of them back to get replacements because the adjusting screws wouldn't set into the rocker body as they should have. And I had to do a bunch of clean up to the brass bushings to keep them from shedding brass into the engine.

There were many machining chips on the PRW that had to be cleaned before use, especially inside the rocker shafts. But in fairness, I have found that on any rocker system that comes from the factory, that includes T&D and Harland Sharp.

If I'm going inexpensive I'll use the Mancini brand rockers made by Harland Sharp or the Comp Cams Pro Magnum.