Swaybar Tab location
Ok, here you go. And like hemi71x said, it doesn't have to be absolutely perfect, there's a whole lot of bushing involved. Hope this helps!
This is a '73+ LCA, stock sway bar tab location
6 5/8" from the tab to the far edge near the LCA pin
4 1/2" from the front of the tab to the edge of the LCA through the rivet
Center of of the hole is about a 1/2" above the top edge of the LCA
Rear "leg" of the tab is roughly inline with the center of the slot for the bump stop. The line is approximately perpendicular to the slot, it's at an angle because of the perspective of the picture
Ok, here you go. And like hemi71x said, it doesn't have to be absolutely perfect, there's a whole lot of bushing involved. Hope this helps!
This is a '73+ LCA, stock sway bar tab location
6 5/8" from the tab to the far edge near the LCA pin
4 1/2" from the front of the tab to the edge of the LCA through the rivet
Center of of the hole is about a 1/2" above the top edge of the LCA
Rear "leg" of the tab is roughly inline with the center of the slot for the bump stop. The line is approximately perpendicular to the slot, it's at an angle because of the perspective of the picture
