Spark when key is turned to the off position?

MORE: The vast majority of ECU boxes you run into are ACTUALLY more modern 4 pin boxes, which only require a TWO pin resistor, but "can" run with a 4 pin installed. The "other half" is simply not used

This simplified circuit omits the "ign2" bypass and shows the "run" as "existing wire" off to top right. THIS CIRCUIT shows that the coil resistor is same as points.........feeds from points (transistor switch) up through coil, up through resistor, and back to the battery. "Just like" the 4 pin, in start, the resistor has to feed the box to power it during cranking. The "existing" wire is dead. ONLY POWER is IGN2 "bypass" being fed to coil+ during "start"