Linkage Adjustment for Neutral Safety Switch?

I have the linkage that DanaDart posted . #21-46 . Disconnect the "front lever", put tranny in "N" from underneath , put shifter in "N" . Insert "front lever" . If it won't slide in adjust the "swivel assembly" @ the control lever until the "front lever" slides in without moving the shifter or the tranny lever . Test , test , and test again . If this doesn't solve the issue perfectly there may be a ratio issue with the " transmission control lever ". Mine is a B&M which is straight . If you have several control levers to choose from , trial and error may solve the "ratio issue" . If not , as in my case , you may have to cut the "front rod" and either lengthen or shorten until all gears work and safety works also . this isn't hard it just tales time . Or, if you have different length "front rods", try that . Later