Pins from the convertible top to the top of the cylinder

So I have the interior out of my 67 Barracuda convertible to do a transmission swap and I decide it’s time to fix the power top once and for all. So I got a replacement cylinder to replace the passenger side that failed and a new set of hoses so I pull the side panel out and get ready make the repairs. I pull both cylinders so i can replace the hoses and I see that there are no pins in either side. I must have removed them when the cylinder went bad and now I have no Fing idea were they are plus the bushings in the top of the cylinders are missing to so I spend 3 hours look in my garage and tool box with no luck. So here is my question for all the convertible experts out there. I find two different pins listed a 1 1/8” and an 1 5/8” are listed and when I look down to the mounting holes it looks to be closer to 1 1/8” but before I order the wrong stuff I just wanted see if I can confirm it. This was supposed to be quick and easy to repair and now I have to worry about the panel laying around and getting damaged. So an help you could give would be appreciated Thanks Bobby