what solid cam is equivalent to a hyd 268 ?

toolman =mike:

I called isky and talked to Ron , about there E-3 cam someone mentioned here on fabo. here are some specs >
E-3 > 448 lift 268 adv dur , 108 lobe separation 2400-6600 rpm .. too big again for my combo. no bottom end .
There was also a E-2 solid with 276 dur.

then , he mentioned a T-3 that he recommends for my combo with 10.5:1 compression specs are >> 455 lift , 260 adv Dur 222@50 , 2000-6400 . I think that is one one for me .