what solid cam is equivalent to a hyd 268 ?

stroker402 said
toolman =mike:

I called isky and talked to Ron , about there E-3 cam someone mentioned here on fabo. here are some specs >
E-3 > 448 lift 268 adv dur , 108 lobe separation 2400-6600 rpm .. too big again for my combo. no bottom end .
There was also a E-2 solid with 276 dur.

then , he mentioned a T-3 that he recommends for my combo specs are >> 455 lift , 260 adv Dur 222@50 , 2000-6400 . I think that is one one for me . both E-2 and T-3 solid cams .

Now you're talking. That sounds better. Interesting those cams aren't listed in their catalog. (may be they are but are hard to find there.) Here's that stock 273 with the T3 cam. The set up is with stock heads, manifolds and exhaust. Capture 273 Isky T3.JPG