Getting the geometry correct on roller rocker position?

Well I'm extremely glad I didn't listen to Hughes and Hughes only! I use the stud mounts and the bolts were bottoming out on the stud before they had the shaft pinned against the pedestals. I called Hughes and explained everything to them and told them it just didn't seem right? They were positive if I had tighten them down as they recommended that would be fine. I put washers into the nuts on top of the shaft and brought it all the way down to the pedestal. I took another 8 turns or so to get it all the way down and tight! If I would have listened to them all hell would have broke loose. My point is is it's hard for any of us out here or even them sometimes unless you're right there and seeing what's going on. I really like the idea of you sending them a video so they can really see what's going on. And I also agree don't listen to anybody out here if you have someone you bought them from and you're working with. I know it doesn't hurt to ask questions out here and get some second opinions or at least get some questions to ask MIKE.