Getting the geometry correct on roller rocker position?

1. Mike sends specific instructions with all his kits. They're in simple, easy to understand English. They explain where, how, and which way everything goes.

2. Ain't no way THAT kit was made for THAT set up. My guess is the OP probably made a mistake measuring for HIS kit. When you order a correction kit, you have to have 4 or 5 very specific measurements of YOUR stuff the way it sits now.

3. The geometry correction kits are not interchangeable......each one is made SPECIFICALLY to the measurements you provide to Mike. If you measure wrong, or misunderstand, your kit will not be right.

I had a kit made for one pair of Edelbrocks that wasn't even close in a new, different pair.

4. If you measure properly your geometry will be perfect when your kit is installed. Also, if you have a 40 or 50 thou "swipe" pattern and it's close to center.........your geometry is friggin horrible.

Go to B3 Racing and read the geometry stuff.

Edit: for all of you guys who already know all this.......sorry. I'm tired......