72bluNblu said

You mean a 1/2” offset to match the front hangers? Because that’s all the front hangers are offset. The “3/4” offset kit is a 1/2” offset front hanger and a 3/4” offset rear shackle with a side load on the front half of the spring with the perches moved in 3/4”. There's only a 1/2" of space between the outside of the stock brackets and the frame rail.

Regardless, the way I made my brackets I’m pretty sure the most I could get out of them would be the 1/2” I put on the mine. The reason is the same as the front, the frame rail is only a 1/2” away. You wouldn’t be able to get at the nuts for the sliders if they were moved over another 1/4”. The rear ones are already inside the shackle mount/bumper brace.

Click to expand...