Ram or Dakota air cleaner on a-body

-
M

MileHighDart

Well-Known Member
Joined
Jun 3, 2004
Messages
4,748
Reaction score
6,017
Location
Lakeview, OR
thought I’d seen a picture somewhere. Jus wondering if anyone has adapted a modern Ram or Dakota air cleaner setup into their A-body mopar?
If so what did you use. Any pics would be a plus.
Thanks
 
Johnny Mac said:
if you're talking about the carb hat piece, it'd be hard to even stroll through a junkyard for the price of the ebay intakes...
FOR 97-99 DAKOTA/DURANGO V8 WRINKLE FINISH ALUMINUM COLD AIR INTAKE+HEAT SHIELD | eBay
Click to expand...

We’ll yeah that’s a good start and you can’t beat the price . I was thinking of taking it a bit further and try to draw air from in front of the radiator support or from the fender well. Possibly use the whole air filter box like this pic.

B360FE68-9DB7-4B85-B87C-3D5115D8FDA5.jpeg
 
MileHighDart said:
We’ll yeah that’s a good start and you can’t beat the price . I was thinking of taking it a bit further and try to draw air from in front of the radiator support or from the fender well. Possibly use the whole air filter box like this pic.

View attachment 1715166664
Click to expand...
thats pretty cool! someone in the coffee club did a setup very close to that... lemme see if i can see who.
 
Yeah I don’t know who’s setup that is, or what year/model parts were used. Or what mods if any had to be made to the inner fender, or just the hole in the radiator support
 
I was lucky to find that old carb hat for my 390 Holley, the filter box was from a 4.0 jeep, I have to say it helped more then anyone could imagine :thumbsup: cool fresh air being delivered to the intake made my little /6 very happy, where I put the box there was already a hole to keep the battery cool, I moved it to the trunk . I will be looking at using it with the 360 if I think the filter will be big enough for the 360

58432_599202720095078_1157430247_n.jpg


69818_168407529841268_100000160677390_581069_625332_n.jpg


JEEP FRESH AIR 1993 4.0 109.jpg
 
Last edited:
MileHighDart said:
We’ll yeah that’s a good start and you can’t beat the price . I was thinking of taking it a bit further and try to draw air from in front of the radiator support or from the fender well. Possibly use the whole air filter box like this pic.

View attachment 1715166664
Click to expand...
I did the same, pulled air from in front of the support I may have to get a filter box like the one you posted for my 360

Johnny Mac said:
@memike

your insights are needed!
Click to expand...
Looks like a good move to getting cool fresh air to the carb :thumbsup:
 
You must log in or register to reply here.
-

Back
Top