Front end not level
I got the pull out by adjusting the torsion bars a bit. I noticed that the rear is also high on the drivers side.
So in other words, who knows what the alignment numbers look like. The alignment numbers all change with ride height. Also, if the camber is completely different side to side, it could contribute a bit to the ride height being a little different. Oh, and the rear springs are probably involved in this issue too if it's not the same height back there either.
Right, back to what I said. You need to inspect
everything for damage, including the rear suspension, and figure out what rear springs you've got in there. Should be a part number stamped into them or painted on.
Diagnosing a problem, sight unseen, over the internet, is not likely to narrow down your problem to a single thing. The best any of us can do is give a list of possible issues for you to check, and you've already got a bunch of things to look at. To actually find the problem you're just going to have to check everything.